We may earn money or products from the companies mentioned in this post.
One of the best things you can do to ensure your safety on the road is to invest in a good tire pressure monitoring system. A flat or blown out tire will not only cause you stress and delay your trip but can also lead to serious traffic accidents. That’s why equipping your RV, trailer, or motorhome with a tire pressure monitoring system can really make a big difference. So, if you’re looking for the best RV tire pressure monitoring system, here’s a guide with the top picks in 2021. Below the RV tire pressure monitoring system reviews, you can also find a buying guide where we’ve listed all the things you should look out for to find the best unit for your specific needs.
RV Tire Pressure Monitoring Systems Comparison
Top 10 RV Tire Pressure Monitoring Systems Reviewed
One of the top rated RV tire pressure monitoring systems in 2021 comes from the EEZTire brand, which has been one of the leaders in the RV TPMS market for more than a decade.
It comes as a complete kit, including a large display and sensors. And you can either purchase the basic setup with 4 sensors or a more advanced kit with as many as 26 sensors, monitoring up to 210 psi.
As long as the sensors are under pressure, the system continuously monitors the tire pressure and temperature at 6-second intervals. If it detects any change, it immediately sends visual and audio warning signals to the screen. And if it doesn’t detect any motion in 15 minutes, the system goes into a power saving mode.
You can monitor the status of the tire pressure and temperature on a large screen. It measures 4.5” x 3”, which is one of the largest sizes on the market and which makes reading all the information on it much easier.
You can also program different combinations of sensors in order to meet the needs of different tires. For example, you can have separate controls for RV and trailer tires. This way if you’re driving only the RV, you can turn off the trailer controls.
The TPMS also boasts a long range between the sensors and the monitor. However, if you have a very long rig or if you’re experiencing electromagnetic interference challenges, you can additionally purchase a booster.
Another great tire pressure monitoring system for travel trailers, motorhomes, and campers is the TireMinder A1A. It’s a popular product among RV owners, which has proven time and time again to get the job done.
You can purchase this system with either 4 or 6 transmitters and it will monitor up to 22 tires. This means that it can work on almost any type of recreational vehicle, whether you have an RV, a motorhome, a 5th wheel, a motor coach, or a trailer.
The TPMS monitors the status of the tire pressure and gives you updated readings every 4 minutes. In addition to psi, the system also shows the temperature for each tire. And it continuously performs self-diagnostics, notifying you instantly with a visual and audible warning if there’s anything wrong with the tires. The monitor displays easily understandable icons, so you can clearly see the type of issue you have and exactly where it’s happening. All this helps to prevent blowouts and accidents.
One more notable feature of this tire pressure monitoring system is the quick reconnect and disconnect buttons. If you need to disconnect your trailer from the towing vehicle, the system supports front or rear disconnecting.
This system includes everything you need to set it up. The complete kit includes a monitor, transmitters, mounting bracket, locking rings, a booster, and a convenient pouch.
TireMinder Smart TPMS
What is the best tire pressure monitoring system for RVs and travel trailers? Another product that stands out is the TireMinder Smart TPMS.
This is one of the most advanced tire pressure monitoring systems. It’s a smartphone-based monitoring system that is designed specifically for use on RVs. Instead of having to install a bulky screen, this unit is compatible with iPhones, iPads, and Android devices. You just have to download the company’s free app, install the transmitters and the device is ready to be used.
The system continuously checks up to 22 tires at 6 second intervals. It can detect low and high pressure, rapid and slow leaks, blowouts, and temperature changes. If the monitor detects any of these issues, it sends an immediate alert to the screen. Moreover, the alerts are both visual and audible, ensuring that you won’t miss the issue.
In the app, besides monitoring tire status, you can also scroll between separate tires, do a data refresh, or a 2-part vehicle disconnect.
Additionally, in this TPMS kit, you also get a Rhino Signal Booster, which is 3 times stronger than the original booster from the brand. This makes it a perfect unit for longer rigs and for those situations when there’s too much electromagnetic interference.
Tymate Solar Tire Pressure Monitoring System
Like other tire pressure monitoring systems, the Tymate unit is also designed to track and warn in situations of abnormal pressure levels in tires. However, one of the main differences between this system and the others is that this one is solar powered. It features built-in tempered glass solar panels that are located on top of the monitor. This means that the system can work continuously without even using the car cigarette lighter socket. Alternatively, when there’s no sun to power the solar panels, the device can be charged through USB.
Moreover, this TPMS comes with 6 external sensors, which feature an all-weather design, meaning that they are sealed against dust, water, and snow. They are powered by replaceable batteries, which last about 2 years.
These 6 sensors dynamically monitor the tire’s pressure and temperature. And you simultaneously get these readings on the display screen. It can track tire pressure up to 99 psi and the default alarm is set for when the pressure is lower than 29 psi or above 44 psi. However, you can customize this warning threshold according to your needs.
Truck System Technologies TST507RV6
Another widely known brand in the market of RV tire pressure monitoring systems is the Truck System Technologies. And one of their best products is the TST507RV6 model.
This system is available with 4 and up to 12 cap sensors. And it also has the ability to monitor pressure up to 218 psi. So, it’s a good TPMS for almost any type of vehicle, including RVs, trailers, 5th wheels, etc.
It tracks the pressure and temperature of the tires in real time and displays all that information on a big color display. You will also benefit from the system’s ability to detect slow leaks. If there’s an issue with any of the tires, you immediately get an alert in the form of text and sound. This allows you to react to any problems as they occur and prevent blowouts.
The display is easy to read and all and it has good visibility in most lighting conditions.
The system is fairly easy to install and setup. It comes with instructions that are pretty easy to follow.
TireMinder Solar Powered TPMS
TireMinder has one more great RV tire pressure monitoring system but this one is powered by solar. It features a highly efficient monocrystalline solar panel which is built onto the top of the display. It provides efficient charging. On top of that, the system comes with a long lasting lithium ion phosphate battery for backup power.
Another advantage of this system is the color display, which mounts on the windshield and offers clear readings of the tire pressure and temperature. It can monitor up to 4 tires and up to 70 psi. So, this TPMS might not be the best for the bigger rigs but it is great for single or double axle trailers with a length of 25 feet or less.
To provide a more reliable signal, this best trailer tire pressure monitoring system includes a signal booster. It’s designed to provide maximum signal distance and to prevent electromagnetic interference.
Bellacorp Tire Pressure Monitoring System
The Bellacorp tire pressure monitoring system is designed to fit almost any vehicle type, recreational vehicles included. It’s suitable for RVs, 5th wheels, trailers, campers, trucks, or 4×4. The system is adaptable for a variety of vehicles. Depending on your rig, you can purchase this system with either just 2 sensors or with as many as 12 sensors.
The system is capable of monitoring up to 34 tires and up to 175 psi. And you get continuous monitoring of both pressure and temperature. If the sensors detect high or low pressure with a range of 15 to 175 psi, as well as temperature up to 186 degrees, the system sends an alert to the monitor. You get an audible and visual warning at the same time showing where exactly the problem is.
All the information regarding tire pressure and temperature can view on the included large screen display. It measures 3.5 by 1.5 inches and it comes with 2 mounting options: suction and hard wire. Moreover, the screen is easily programmable, easy to read, and easy to view at night with its backlighting.
B-Qtech Solar Power TPMS
The last, but not least tire pressure monitoring system for RVs and travel trailers is the B-Qtech model. It’s designed for 4 to 6 tires, making it suitable for RVs, motorhomes, trucks, or travel trailers.
This is an intelligent wireless system that features a Freescale chip design that makes the signal more stable and accurate. To make the signal even stronger and reliable, you can also purchase the optional signal booster.
As for the sensors, they are made lightweight and waterproof with the ability to withstand harsh climate conditions. They can monitor the pressure in the range from 0 to 130 psi. On top of that, they can also monitor temperature up to 176 degrees.
Both the temperature and pressure are displayed on the high resolution display. You can power it either using solar power or the USB interface located on the back of the unit. The solar panel is located on the top of the unit, so you can place the device anywhere on the instrument panel and it will charge as long as the sun is shining. But when it’s raining, you can switch to the USB charging option and by this, you can ensure that you have continuous safe travel.
Another advantage of this system is the ability to choose between different pressure and temperature measurement options. You can program the monitor to display the pressure in either PSI or Bar and you can also program the temperature readings to display in either Celsius or Fahrenheit.
The Tire-Safeguard TPM-C106N is also one of the best TPMS on the market. It offers valuable features and it’s effective at providing accurate tire information.
For one, this system comes with flow-through sensors, which means that you can easily refill your tires without their removal. These sensors, which can also be secured in place in order to prevent theft or loss, are waterproof and come with a replaceable battery.
Another advantage of the sensors is their long range capability. For most vehicles, whether you have a 5th wheel, a motor coach, or a travel trailer, this signal range will be enough without the use of any booster.
The same as the other TPMS devices, this Tire-Safeguard system continuously monitors the status of your tires. Upon detection of abnormal tire situations, such as low and high pressure, high temperature, or slow leak, it automatically sends an alert to the monitor screen. The warning signs are displayed as alarm icons and red light. On top of that, you also get an audible warning. You can also program the system with your personal warning thresholds.
The Tire Traker TT-500 is also a trailer tire pressure monitoring system that is designed for 4-wheel vehicles. It’s one of the most advanced TPMS on the market and it offers all the features to make the tire pressuring monitoring process simple and easy.
First of all, this system comes with a large, easy-to-read display. You can mount it either on the dashboard or the windshield. It comes with the two mounting options included in the box.
The monitor gives out readings of both temperature and pressure for each separate tire. You can easily scroll through each tire to display the information for each separate one.
When the system detects an abnormal level of tire pressure or temperature, it gives you a warning in the form of both text and audio. The warning threshold is pre-programmed when the device arrives. However, you can also change the default temperature and pressure range by re-programming the system. You can find out how to do it by checking the simple instructions that come in the box.
The system comes with 4 wireless tire pressure sensors that can monitor up to 232 psi. The sensors also come with replaceable batteries, which should last about 1 year of use. As for the monitor, it’s rechargeable with a single charge lasting about 1 month.
What Is an RV TPMS?
A TPMS is a system the purpose of which is to monitor the status of tires and to stop potential accidents from happening. This system uses a series of sensors that you install onto the tires and through which you receive real-time status information on a display. So, if there’s a problem with any of the tires, the driver is immediately informed. And the alert usually happens in the form of a visual and textual warning. By calling attention to abnormal levels of pressure in a tire, the system prompts the driver to inflate it to proper levels.
If you have a car that is built after 2008, you have the tire pressure monitoring system already built-in since then they were made mandatory in the United States. But most recreational vehicles, as well as cars and other vehicles made before 2008, are mostly not equipped with the system.
However, any type of vehicle can greatly benefit from installing a TPMS since it increases your safety on the road.
Types of Pressure Monitoring Systems for RVs
Before buying a particular TPMS, it’s important to understand the differences between the types of these systems. And the two main ones are the direct and indirect TPMS.
Direct TPMS uses individual sensors that are installed on each tire. These sensors transmit pressure information to the central control module.
Indirect TPMS, which are the systems used in most cars, work without the individual sensors. Instead, they use wheel speed sensor data. It works based on the fact that an underinflated tire is smaller compared to a properly inflated one. And a smaller size makes it rotate faster than a larger one. Electronic monitors within the car detect when one of the tires is rotating faster and show a warning to the driver.
These systems are typically inexpensive and come already pre-installed in the vehicle. They also don’t require much maintenance or programming. However, their downside is that they don’t show as accurate readings as the direct TPMS do. They don’t show you the exact pressure or temperature of your tires. They only tell you if there’s a problem.
How Does Tire Pressure Monitoring System Work?
Have you also been wondering how do TPMS work? Well, as we’ve mentioned above, there are two different types of TPMS and they work slightly differently. The indirect system we’ve described above but below, you can read more about how to do direct TPMS work.
A typical direct tire pressure monitoring system consists of an electronic programmable monitor and sensor transmitters. The latter is installed onto the valve system of the vehicle’s wheels with a separate sensor on each tire. Each of the sensors has a unique serial number
These sensors continuously analyze pressure and temperature and using a wireless radio signal, they send the readings to the central control monitor.
On the monitor, you can usually program the threshold for warnings. You can set the low and high limit for pressure and temperature, so the system will send you warnings when it will those levels.
One more thing to note about direct tire pressure monitoring systems is that the sensors can either be flow through or not. The flow through design offers the advantage of inflating your tire without having to take the sensor off. The sensors that don’t have the flow through design have to be removed each time you need to inflate the tire. And every time you do that, you’ll also need to recalibrate the sensor.
One of the advantages of direct TPMS over indirect includes the fact that you can monitor your tires’ status in real-time, so you can deal with the issue before it becomes a real problem. And another advantage is that you get exact readings of pressure and temperature.
Benefits of the Best TPMS for RV
1. Improves Road Safety
Getting a blown out tire while you’re driving at high speeds can be extremely dangerous. Underinflated tires can also cause unpredictable drive patterns. And they are related to many injuries and deaths caused by road accidents.
The purpose of tire pressure monitoring systems is to prevent that. If there’s an abnormal level of pressure in your tires, the system will immediately send you a warning so that you will know that it’s time to visit an auto repair shop. This helps to increase safety in everyday driving situations.
2. Extends Tire Life
Another reason to get an RV TPMS is that it will help extend the life of your tires. An under inflated tire is one of the main reasons for tire failure. When there’s low pressure in the tire, it causes thermal and mechanical overload and this leads to sidewall damage, ply separation, or other types of tire damage.
Continuing to drive with an under-inflated tire can also cause the casing to break down and it can also lower its capability to retread.
TPMS helps to prevent that damage by notifying you when the pressure level has become low, so you can inflate the tire to a proper level.
3. Increases Fuel Efficiency
Under-inflated tires also reduce fuel economy. For every 10% of pressure loss, the vehicle also loses about 1% of fuel efficiency. Proper inflation, on the other hand, increases your MPG, which can help you to significantly lower your fuel consumption.
4. Increases Cost Efficiency
Having an RV tire pressure monitoring system can help you get better rates on insurance due to the higher level of safety that comes with it. It will also increase the value of your recreational vehicle.
Moreover, having the system installed will also help you save money on repairs and downtime that you might otherwise have to deal with.
5. Good for the Environment
Having your tires always properly inflated is also good for the environment. Under-inflated tires tend to release more carbon monoxide into the atmosphere. A TPMS can help you prevent that.
How to Choose the Best RV Tire Pressure Monitoring System? – Buying Guide
If you’re searching for the best RV tire pressure monitoring system, a good start would be understanding all their features. This will help you to know exactly what to look for in order to find the most reliable product. So, here are the main things to look out for when shopping for a new RV tire pressure monitoring system.
Type – Direct vs Indirect
Of the two available types, the most commonly available option for recreational vehicles is the direct TPMS. When choosing the best system, you want it to provide the best level of safety and accuracy. And that’s what the direct TPMS offer.
A direct TPMS offers more specific information and that information is available for each tire. It’s not just generalized information. Instead, it clearly shows where and what the problem is, which makes fixing it much easier.
Indirect systems, though cheaper, don’t always provide accurate and reliable information. Since they don’t use sensors but an anti-lock brake system, they don’t get specific information regarding pressure and temperature in tires. And it doesn’t specify whether it’s just one or all of the tires are underinflated.
Look for a system that comes with a clear, easy-to-read display. It should display icons and text in an easily comprehending way. So you could easily monitor if there are any changes in the tire status and if there are any issues detected, you could quickly respond to it.
Also, look for a display that is large, so you can clearly see all the readings, and that it has backlighting, so you can also view it at night.
Check also how the monitor sends signals. It’s a benefit if the warning is sent in both a visual and audible way. This way, you can safely keep your eyes on the road and you’ll still hear if there are any issues with the tires.
Another benefit would be if the monitor is programmable. Most systems come with pre-set threshold limits for when to send the warning. But on some of the units, you can set those limits yourself. However, this is not a necessary feature and most people might not need it.
For those who prefer to have the readings in Celsius and Bar instead of Fahrenheit and PSI, check if the system offers these options. Most systems only offer Fahrenheit and PSI but some allow the user to switch between the two unit options.
Both the sensors and the monitor are usually charged by batteries. However, while the monitor usually comes with a rechargeable battery, the sensors come with replaceable ones.
When choosing a TPMS, check the battery’s lifespan. A good TPMS will have durable and heavy-duty batteries that will last a long time. The sensor batteries are a bit of a hassle to replace, so you don’t want to be doing it too often. You also don’t want them to die in the middle of the trip, so check if they have a good lifespan.
As for the monitor battery, there are usually a few options to charge it. Some devices use a USB and others also offer solar charging.
Ease of Use
When choosing an RV TPMS, opt for one that is also easy to use. A complicated system can lead to you messing things up and this causes more trouble. So, look for a product that will offer you more convenience and help you save time.
RV tire pressure monitoring systems are not cheap, so you want to buy a unit that will last you a long time. A good indicator of a highly durable product is a good warranty from the manufacturer. If it comes with a lifetime warranty, it shows that the manufacturer is confident in the product.
On top of that, make sure that the sensors provided with the system are capable of withstanding the harsh weather conditions and the rough environments your vehicle will be riding in. A good quality sensor should be waterproof and it should be able to withstand excessive heat.
A good RV TPMS should also be easy to install. You don’t want a complicated system that will just drain your time and energy.
The best products will have a simple installation process with clear instructions included in the box. On top of that, they will also have included all the basic accessories that you will need to set up the system. This will give you the peace of mind that you can install the system right out of the box.
The price of the RV tire pressure monitoring system is another important factor to consider. Everyone, of course, would prefer a more affordable option. However, don’t let the price be the only deciding factor. The cheapest doesn’t always equal to the best quality. The best RV TPMS should have the perfect balance of value and price. So, first set your budget, and then compare the options that you have narrowed down to. Consider all their features and think of how valuable they are to you. Moreover, check user reviews to see if the product stands up to the manufacturer’s claim and if it stands up to time.
RV TPMS Frequently Asked Questions
Are TPMS Sensors Required?
If you’re located in the United States, as of 2008, all passenger car models are required to be equipped with a TPMS. And if you’re in the European Union, it was made mandatory in 2012.
For recreational vehicles, tire pressure monitoring systems are not mandatory. However, it’s a big advantage if you do install one.
How to Install a Tire Pressure Monitor Sensor?
The tire pressure monitoring system that you’ll choose will come with its own installation manual. The basics of the process include installing the sensors on the tires, calibrating them, and mounting the monitor. However, check for more detailed instructions in the manual as the process can differ from model to model.
You can also visit a servicing shop to have the system installed for you. However, for that, you’ll need to pay extra and if you’ll be using expert help every time you need to change or install a TPMS, it can get quite costly. So, choose a tire pressure monitoring system that is fairly easy to install and which comes with everything you need for the process. If after reading the manual, you’re still at a loss at how to install the system, check out youtube tutorials that feature detailed step-by-step instructions.
Are TPMS Sensors Vehicle Specific?
The sensors that come with tire pressure monitoring systems are usually designed for monitoring specific psi ranges. Some sensors are designed for use on smaller rigs, while others can work on big and small ones. To make sure that a particular system will fit your rig, make sure that that rig’s psi range can match your tire’s required pressure level.
Where to Find Vehicle’s Recommended PSI?
Having your tires inflated to a proper level is important for maximizing the life of your tires and getting the best mileage. However, not all vehicles are the same and different vehicles require different tire pressure. To find the required tire pressure for your specific RV or travel trailer, look for a sticker inside the vehicle or inside the certification label. If the sticker is missing, inside the vehicle, you can contact the dealer for that information.
The average travel trailer tire pressure is between 40 psi and 65 psi since the average weight of the trailers is between 1500 lbs and 15 000 lbs. However, this is just an average. Consult the ratings mentioned by your manufacturer to find the required psi for your rig.
How Long Do the Batteries in the Sensors Last?
The lifespan of sensor batteries depends on the particular model you have. It can also depend on a variety of other factors, such as the environment, drive cycle, and the rate at which the sensors transmit data. For example, a sensor that transmits information every 10 seconds will not last as long as one that transmits it every 15 seconds. As a result, some sensor batteries last as long as a decade, while others last only a few years.
What Is the Difference Between Flow Through Sensors and Anti-Theft?
These are actually two different features. Flow through sensors that are designed so that after the installation, you don’t need to remove them when you need to re-inflate or deflate your tires. As for the anti-theft sensors, they are designed to lock sensors in order to prevent burglars from taking them. You don’t have to choose between them. Most tire pressure monitoring systems come with sensors that have both these features.
What Is the Leading Cause of Sensor Failure?
Sensors or their stems are often damaged by corrosion that results from harsh environment conditions. This can include moisture, road salts, etc. And this damage can affect the ability of a sensor to read and transmit data.
What Information is Transmitted by the Sensors?
The most common information that you get from a tire pressure monitoring system is the pressure and temperature data for each of the tires. Other information can include battery life and diagnostics.
Why Does Tire Pressure Change?
There are many different factors that can lead to tire pressure change. The main two reasons, however, are punctures and the changes in ambient temperature. For every 10 degrees drop in ambient temperature, the tire pressure also drops about 1 psi. Moreover, the air in the tire and rim tends to naturally escape over time. So, for every month of driving, tires lose about 1.5 psi.
To find the best RV tire pressure monitoring system, take into account the factors that we’ve mentioned in our buying guide and compare the top available products on the market. This will ensure that you not only buy a good product but the best product for your specific vehicle. And this TPMS will give you peace of mind so that you can safely enjoy your life and adventures on the road.